ink won't dry ink won't dry If you are trying to print on normal transparent film then the ink will not dry, it needs to be special transparent file for inkjet printers.
Question about Epson Stylus Office Equipment & Supplies
...print is coming out very light on most colors with lines through the page. I'm assuming everything dryed up on the heads and I have to clean them but I don't know how. Can someone tell me. the ink ...
Question about Epson Stylus Office Equipment & Supplies
...ink in this tube tends to dry up and prevent any new ink from entering, preventing the nozzles from getting a thorough clean. The printer most likely will have to be taken apart and cleaned with ...
...scibe disk drive. You need the printable blank cd's, they have a paper blank label so that the ink goes in and dries properly. The ink doesn't dry on a lightscribe cd, and even dry, it will wipe
Question about Epson Stylus Office Equipment & Supplies
...ink dries and it wont print. usually what i do is taking out the head and put it in some alcohol. for a day or two. the i blow dry it or leave it dry for two or three days. take a straw and blow into ...
Question about Epson Stylus Office Equipment & Supplies
Printer does not print black ink - only blue. We have installed two new black ink cartridges. You'll find the printhead, beneath the ink carrier, is clogged with dried ink. Go to ...
...ink cartridge dry on it's own.WHEN you are satisfied the areas are dry, reinstall the black ink cartridge.Close the case, plug back into power.WAIT 1 minute, then turn the All-In-One on. Once it ...
Question about Epson Stylus Office Equipment & Supplies
...ink dry out? Using iP1800. How can i preserve my cartridges so that printing quality remains the same? I am going for a vacation and will not be using my printer for 4 months. I always store my ...
Question about Epson Stylus Office Equipment & Supplies
...the ink cartridge, did you let the ink in the previous cartridge run completely dry? If you did, then the printer heads are completely dry and it will take awhile for ink to start flowing
...Use paper towels to dry the waste ink absorber pad. Let it dry completely before installing it back in the printer. Reinstall the ink pad into the printer and run a test page to make sure it
788 questions posted
Usually answered in minutes!
1,911 Questions
510 Questions
454 Questions
438 Questions
438 Questions