Epson Stylus Photo R200 InkJet Printer "print tray" Questions

TRAY with the white (or printable) side facing up. Note: To print on small 8cm CDs, please place the small CD ring on the tray first, then place the CD inside the ring. 6. Slide the tray into the tray

...tray goes in fine once print is activated on Epson CD LABEL Print but then comes back out again with that message and red light flashing. If I try again, it gives me the message CD/DVD tray open... ...

...tray to print....keeps showing error. I've been using this printer for two years and have always had some difficulty getting the CD tray set properly so it will print. It starts the process and then ...

...tray to the upper position to print on a disc, and it is almost impossible to get the tray positioned correctly. The two red lights blink when the printer does not like the tray position. I have ...

stops printing cd half way when printing cd half way through job printing stops and the tray is ejected .I get a message saying cd tray not set properly.It asks for maintance . trird to run maintance ...

...Tray I can print photos no problem, but when I try to print a CD/DVD it won't do it. The tray feeds in and then feeds straight out. The printer asks me to reload the tray and press the maintenance ...

...print tray keeps jamming When trying to print to disc the tray keeps coming up as jammed, reset it and re-enter and it then gets stuck again did you align the track? check the tray for any cracks, ...

...tray through just fine.. begins to print.. gets about 1/3 of the way down.. then just stalls. it hangs for a short while.. then the printer head goes back to it's original resting position (like it's ...

...tray instead of disk I have all the usual settings that make the cd print correctly, I've compared these with notes that I have. However, the ink is printing on the tray instead of the CD. Help!! ...

...print one or two CD I read from other comments that the markers on the tray must be clean. As I already printed several hundred CD/DVD the leading marker on the tray was badly marked. Tried to clean ...