...print head home position , gently, clean this strip with the wet paper towel, making sure not to apply too much pressure as you can pull the strip off the hanger tabs or erase the small lines printed ...
Question about Epson Stylus Office Equipment & Supplies
...are still gaps. I've done this several times. takeoff print head use wet cloth to clean, repeat until problem solve. If not try soak with warm water just at dirty part only not hole print head, ...
Question about Epson Stylus Office Equipment & Supplies
...TRASNFER PAPER THE INK RUNS WHEN WHEN PRINTING ON TRASNFER PAPER THE INK RUNS WHEN THE SHIRT GETS WET. some inks work with that type of printing,some dont and water will disolve the ...
Question about Epson Stylus Office Equipment & Supplies
My printer prints but no document is printed on the paper. Yes I have ink 1.remove your catridge wet your catridge head with headcleaner 2. clean your catridge head with tissue paper 3. do this two or
Question about Epson Stylus Office Equipment & Supplies
...wet solid blocks of print out. Large amounts of ink are printed on paper. Traces of color but primaeily a dark grey to black mass of ink with no shape or object recognizable. Jay Killen 831-915-4117 ...
...Black ink cartraidge ,if thats empty or dry the you have to replaced that with new one. If the ink is full and wet then reset the printer & go for printer test print from print
...print. Tried head cleaning Try a Q-tip wet with rubbing alcohol. Very gently rub the print head wher it contacts the paper. You will most likely have to unplg the printer to prevent the cariage from ...
...wet ink. It worked fine just a couple days ago. What program are you using to print out photos? Try to take the ink cartridge out and put it back in. Go to this link, instructions on how to replace ...
Question about Epson Stylus Office Equipment & Supplies
...print head think I got sensor wet with windex while trying to soak print head A picture or video is helpful get a paper towel wet (not soaking) with a diluted simple green mixture and fold it a few ...
...wet. Here is the print quality: I checked the nozzle and the test came out fine. Then i tried to print again (wasted my 2nd DVD ) and the result was still same as above. What is the problem? can ...
393 questions posted
Usually answered in minutes!
1,911 Questions
664 Questions
510 Questions
454 Questions
438 Questions
