Question about Epson Stylus Office Equipment & Supplies
...left at the top - click on maintenance to clean the head. I have had several Epson printers that started doing this with black and running the head cleaning utility didn't help. You can get around ...
Start, go to Control Panel > Printers (Vista) / Devices and Printers (7) / Printers and Faxes (XP) Right click on your printer, click Printing Preferences, click Maintenance, click Nozzle Check. If
Question about Epson Stylus Office Equipment & Supplies
...model. Unplug the power (or at least switch off the printer before you do the following) - Go into Start and Control Panel, Printers and click right on the printer icon and then left click on Delete ...
Question about Epson Stylus Office Equipment & Supplies
...start to get an improvement. Leave for 24hours and try the nozzle check again and you will probably find it is OK. When printing in photo mode it does not seem to use the same nozzles, don't know why ...
Question about Epson Stylus Office Equipment & Supplies
...out,,,, it is the sensor that is attached to this that causes the error. It would appear that if on start up if it rotates it is probably a problem with the left one, if it doesn't rotate at all ...
...printing. Some lines only partially printed. As a general rule, running an inkjet printer through its cleaning cycle is the first step for any print quality issues. It may take several cycles and it ...
Question about Epson Stylus Office Equipment & Supplies
...printing a partial picture like the top and does 2 or 3 of these partial images of the one tombstone. I tried changing the setting to Best so it will go slower than say rough draft but it is still ...
printing magenta After I clean the print heads, it will print a partial page, then it slowly quits again. I've tried the soft, medium, and hard clean cycles for the heads, no difference in performance
Question about HP Office Equipment & Supplies
...holding the buttons down, plug the power cord back in. Release the buttons after the all-in-one starts up. Product family/model Button press HP PSC 2500 series Press and hold # and 3 while ...
...few lines, or only partially prints them. How do I correct this problem? On your inkjet printer, start the Lexmark software, and run a "print-head-cleaning-cycle", since some (not all) of the ...
393 questions posted
Usually answered in minutes!
1,911 Questions
664 Questions
510 Questions
454 Questions
438 Questions