Dyson DC14 All floors Bagless Upright Cyclonic Vacuum "motor stopped working" Questions

Ad

Question about Rainbow Vacuums

1 Answer

...stopped working, so i pulled out some long hair from the cylinder and then when i turn the vacuum on the beater bar brush works for like 10 seconds and then shuts off. Does the power head motor stop, ...

Ad

Question about Broan-NuTone Vacuums

2 Answers

...working again. Then it stops after a couple min and the cycle continues. I'm wondering if my unit should have been replaced with another power unit. The problem is definetly the motor. make sure the ...

Ad

is ment to be for animal hairs as well but I can only use for a few min What do you mean by it stops working? Does the motor stop running, or does the motor keep running but it stops picking up things

...motor not working. The power head motor works. Is there a reset for the motor Suction motor stopped in the middle of vacuuming. Power head motor still works. No reset you will need to replace the ...

...motor stopped working blue sparks from motor where the cord plugs into the unit, then it stopped working. will not turn on either cord shorted out or switch failed would replace cord first if that ...

...working and motor stops after some time you have problems with motor not the switch If you turn vacuum on and if’s working but after putting him on the carpet brush roller slow down or stop turning ...

Question about Shop Vac Vacuums

1 Answer

...stopped running, then the most common cause is a faulty switch. If the machine is still under warranty, contact Shop Vac for a replacement motor, Switches for shop vacs are not available, only ...

Question about Dirt Devil Vacuums

1 Answer

motor stopped working it might be the cord, but the motor is more like it, the bagless vacuum have more issue, and if you don't replace the hepa filters offen then the motor goes. If I can help future

My motor just stopped working. It's a brand new My motor just stopped working. It's a brand new vaccuum. go the warranty way, best thing when new.

...working again, then it stops in 3-5 mins again. i tested the motor without pulling the belts, it works fine, it runs non-stop, no heat at all. With the belts in (with loads), then it stops. Do I need ...

Not finding what you are looking for?
Dyson DC14 All floors Bagless Upright Cyclonic Vacuum Logo

288 questions posted

Ask a Question

Usually answered in minutes!

Top Dyson Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Dyson Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...