Dyson DC07 Bagless Upright Cyclonic Vacuum "thermal cut" Questions

Thermal Cut-Off After cleaning scatter rug, machine turned off. OK. thermal cut-off. However, now it will run for 1 second, turn off, then in a few seconds, will run for 1 second and turn off. etc. Do

...off. My DC04 cuts out after abou 5 minutes use. I think there may be a thermal cut-out somewhere? thermal cut out in coils of motor,you have not been keeping filers clea,I THINK. motor is ...

...thermal cut out switch. I was wondering if you can tell me where it is situated as im thinking of bypassing it until i purchase a replacement, I take it is possible for one of these switches to ...

...thermal senser that has rust all inside of it ,my ? is will that cause the motor to shut down ,could the rust in the senser causing it to cut off ,cause the vacuum runs well then cuts off If it is ...

cut, but getting no power. I did notice next to the on/off switch there a thermal reset button, and it seems like there is no tension behind maybe that reset went or is there a fuse involved? yes that

...motor. the motor will cut out within a couple seconds of operation even after the thorough cleaning. I don't believe there is an external thermal reset. It is most likely built into the

...thermal cut-off which is caused by a blockage. The machine will turn itself off before it overheats if it is a thermal cut-off. Once it has cooled down, you will be able to turn it back on again ...

...Shark keeps cutting out.Filters clean and plenty of suction. If it's overheating (auto reset thermal protection) and cuts off afer the machine warms up, then it may be motor venting, brushes, ...

...THERMAL CUT OUT BLOCK INSIDE THE MOTOR HOUSING THIS HAPENS WHEN DYSON IS USED WITH CLOGGED FILTERS AND HEAT DAMAGE TO THERMAL BLOCK AVERAGE REPAIR COST £45 - £ 69 FOR NEW ...