...handle to vacuum, it looses all suction. Check the adapters at the bottom. They're supposed to move cleanly when you lower the handle. It's pretty obvious if there's an air gap when you lower the ...
...suction is sent to the hose ie top of vac handle when handle is tilted down to the user vacuum position it should send the power suction to the floor also make sure collection bin it in securely that ...
handle back to vacuum the hardwoods it loses all suction from the bottom. The telescoping arm still has plenty of suction. Why doesn't my Dyson vacuum the floor? With the DC14 in its upright position,
...suction to the floor or to the handle accessories; depending on the tilt of the handle. This may be worn, or the seal is not working. It can be easily popped out and checked. Replacements run about ...
Question about Hoover Vacuums
...lost all suction from the base when pedal is pressed and handle tilted back. i can only hose with attachments in upright position There's a serious obstruction in the base. You'll need to clean ...
Question about Dyson Vacuums
...suction up the extendable pipe, but when you pull the handle back, it should gently glide from one direction over to direct vacuum suction to the bottom plate. It's tha part which is getting stuck in ...
...suction inlet (where handle meets gasket, above the Bottom Tank) which will cause little or no suction. - Check the red Tank Lint Screen for debris. If the Lint Screen is dirty, the unit will have ...
...suction inlet (where handle meets gasket, above the Bottom Tank) which will cause little or no suction. - Check the red Tank Lint Screen for debris. If the Lint Screen is dirty, the unit will have ...
...suction inlet (where handle meets gasket, above the Bottom Tank) which will cause little or no suction. - Check the red Tank Lint Screen for debris. If the Lint Screen is dirty, the unit will have ...
...suction. I found that there is a door that opens when you tilt the handle in the down possition. I think there should be a spring in place so it can open. Until I find a replacement spring I have to ...
1,413 questions posted
Usually answered in minutes!
870 Questions
836 Questions
655 Questions
597 Questions
450 Questions