Dyson DC07 Animal Bagless Upright Cyclonic Vacuum "fix vacuum head spinning" Questions

...vacuum turbine head attachment stops spinning. Dyson DC23 canister vacuum turbine head does not spin, with red stopper pushed in or out. Brush is clean, and if the rubber 'u' gasket is covered ...

...in the head is not working. I have tried the button which supposedly activates it, but it is still not working. How can I fix this problem? you will need to replace the yoder loop with in the

...EP238 canister vac. The air-powered brushroll in the head sometimes doesn't spin. I need helping fixing it for finding a replacement, even a compatible model. The air driven head is probably bond ...

..."looks ok". What could be the problem, and how can I fix it. Sounds like the belt is just broken friend. If you have one, just remove the brushroller from the head of the vacuum and ...

...head on my Canister Vac has stopped spinning.I have tried the reset button but that has not fixed it.Is there a quick fix that I am missing? Did you check the powerhead drive belt. Procedures for ...

...fix this? The vaccum picked up a very small wire from a video game and i turned it off immediately. I unwound the wire but the brushes no longer spin. You have either broken the belt or more likely ...

...stop spinning when they come in contact with the carpet. Help The brush head appears to not be locked in place and is moving up and down. How can I fix this problem? The belt is probably stretched ...

...vacuum is running, and then check your power hose and wand for continuity (checking for a broken wire) while the hose is disconnected from the canister. If all this checks out and the power nozzle ...

...fix it? I had this problem with the Dyson Ball vacuum cleaner. The brush bar was spinning uncontrollably and the head was not picking up any dirt. The solution was to remove the brush bar and and ...

...fix it, it could be one of the two switches that control the brushroll, a bad wire or connection somewhere in the vacuum or power head, a bad connection between the vacuum and the power head or the ...