Dyson DC07 Animal Bagless Upright Cyclonic Vacuum "beater bar seems" Questions

Ad

Question about Vacuums

1 Answer

beater bar belt too loose My beater bar v-belt doesn't seem to get tight enough when engaged. The beater bar slows or stops when it contacts the carpet, and as a result the flat drive belt spins ...

Ad

...beater bar seems to have worn and is loose. (very noisy) the vacuum still works but the beater bar rattles. Not sure how I can help, as it seems you know what the problem is! Fit a new brush bar! On ...

Ad

Question about Bissell Vacuums

1 Answer

...beater bar? The vacuum makes a lot of racket when turned on. When I remove the beater bar it doesn't make the racket. Upon further inspection of the beater bar, I can see the end cap appears ...

Question about Dirt Devil Vacuums

1 Answer

...beater bar). I have had to use a flat blade screwdriver to CAREFULLY pry the end caps and bearings from a beater bar. Be careful not to stab your hand with the screwdriver (It HURTS!!!) Once you get ...

Question about Clarke Vacuums

1 Answer

beater bar The beater bar will not work. I have changed the belt and there is a lot of suction from the hose. Just seems like the base is not turning on You may have a bad switch, one part of it is ...

...beater bar stopped working, took apart cleaned and belt was fine. this one had a reset switch for beater bar. had insurance at best buy so returned for a new one. used 2x beater bar not working and ...

...beater bar and check in the suction cavity behind it. That's where they usually plug. --W/D-- My M.R. cleaner had the same problem. I found the drive belt for the beater bar was broke. Turn the ...

Question about Dyson Vacuums

2 Answers

...beater bar (brush) I have found that the belt for the DC17 is about .100" too wide to properly fit around the cogs on the beater bar, I took a sharp pair of scissors and cut of the edge and it seems ...

Question about Hoover Vacuums

4 Answers

beater bar doesn't seem to be going around as well as it should be can you help i take it the belt was put back on !! i would say hubbi forgot the tension arm a little black striker that can go in two

Question about Filter Queen Vacuums

1 Answer

beater bar makes excessive noise Mine was making loud noises too. ratcheting sound. Probably the beater bar has dirt and garbage. I was told to take it out and give it a good cleaning, and check the ...

Not finding what you are looking for?
Dyson DC07 Animal Bagless Upright Cyclonic Vacuum Logo

1,047 questions posted

Ask a Question

Usually answered in minutes!

Top Dyson Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Dyson Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...