...making a very loud noise. any suggestions? When the motor bearings start to go bad, they will make a loud noise. Some motors if a piece broke off of the fan, then it also will make a loud noise. You ...
...making loud noise but picks up My Hoover is making a really loud noise. It does pick up. I have checked all filters and hoses. Emptied Hoover. The roller brush seems ok and not clogged with strands ...
Question about Shark Vacuums
making-noise Aug 20, 2021 - Another cause behind the loud noises coming from your Shark vacuum is an overly dirty or damaged filter. Remember: air must be able to pass ... ?Loud Or High Pitch Noise ยท
...making loud noise My Dyson started making a loud noise like there was some obstruction near the roller. After cleaning thoroughly it still made the noise, I thought maybe it was slippage in the belt ...
...making loud noise My dirt devil featherlite is making an awful, loud noise. It still seems to be working but it sounds like it's going to blow up. It could be 1 of 3 things: 1. The belt that drives ...
...loud noise detecting a possible suction issue. I've also had loud noises and turned over the vacuum and where the brush is, traps hair, thread, rubber bands, etc. Just take a scissor and cut it all ...
...loud noise like something is impeding the Makes a loud noise like something is impeding the belt when carpet is selected and vacuum is being used. No noise when upright. Belt is intact. Roller will ...
...Loud noise I was vacuuming up some Cheerios and dried peas my toddler had dropped on the floor when the vacuum started making a roaring noise. I cleaned the filters and hoses and replaced the belt, ...
...making a loud noise My vacuum started making a loud noise and it smells hot. I checked the belt which is fine and there is nothing stuck in it. Help Is the smell rubber or electrical. If rubber then ...
Question about Kenmore Vacuums
...loud noise started. It was the roller bar. I talked to a man at our local vacuum parts store and he said those rollers are not going to last. The bearings go. The old one doesn't look like it's beat ...
884 questions posted
Usually answered in minutes!
1,132 Questions
870 Questions
836 Questions
597 Questions
450 Questions