Question about Fujitsu fi Office Equipment & Supplies
has Fujitsu fi-4340c scanner. Worked for a while then it showed Front Side Optical Alarm. I tried to clean sheet path, and replaced roller and pickup pad. Still the same error. Does anyone has the ...
Question about Fujitsu fi Office Equipment & Supplies
Backside Optical alarm (G) when using Duplex option Only when using the "Duplex" option, we receive the following error message: On the scanner panel: Backside Optical alarm (G) On the TWAIN Driver: ...
...I SCAN A DOCUMENT EITHER THROUGH THE FEED TRAY OR ON THE FLAT BED, i GET AN: FRONT SIDE OPTICAL ALARM ERROR WITH THE FOLLOWUNG IN SENSE KET = 0X4, ASC = 0X680 Try a flatbed scan scan with the ...
Question about Fujitsu fi Office Equipment & Supplies
...bulb\r\nSense Key=0x4 ASC=0x680 DDES=0x7E Hi Dana,The error you are receiving is Flatbed Optical Alarm.This alarm occurs when the READ command for the first document is received, or when gain of ...
..."F" AND "4" DISPLAYS SILMULTANIOUSLY Hi,This error is Background switchover alarm. Check the background change over mechanism drive and BW motor functioning or not? Cleaning ...
Non working unit Shows error code: Front Side Background Alarm.. Pulls paper on test mode thru machine. When on kofax software, paper is pulled and stops at entry feed rollers. Could this be a bad ...
...when receiving Read Command (to start scanning) and displays the result if any error or alarm is detected. Error code-E3 in Fi-4120c2 scanner means "Light intensity check" . When this ...
...fi-4750C Flatbed Scanner i have a problem when i get a scan the lcd write (front side optical alarm(G) i checkd the sensors please help me 1.st step remove the software from the computer and ...
Fujitsu FL-4750 Optical alarm (g) I have cleaned all the optics and re assembled and still have this error This is usually a main board fault. re solder the legs of the 2 sets of the 3 transistors on ...
Question about Fujitsu fi Office Equipment & Supplies
...Larry, The F-4 error in Fujitsu fi-6240 scanner indicates Background change over unit malfunction alarm. It may be caused by the malfunction of background motor or optical unit or damaged optical ...
13 questions posted
Usually answered in minutes!
109 Questions
61 Questions
76 Questions
33 Questions
26 Questions