Gateway (2500068) Motherboard "monitor keeps shutting" Questions

has arrow ointing to DVI and keeps shutting off saying monitor going to sleep try to look at your power option.. its in the control panel.. set the settings to never.. in the ''turn of monitor

laptop shutdown monitor shut to soon / stuck in sleep mode o.k heres the problem: usually shutdown on laptop is normal but if i close the lid ( the monitor ) to soon before the shutdown is complete; ...

...On initial startup it loads OK, after login it locks up. 1) If I restart the pc I get nothing onthe monitor except a warning that no signal is being received. 2) If i shut it down by holding in the ...

...monitor that keeps shutting down after about 10 min.. When it comes back I get the message: 1:auto detect analog. I've tried going into COntrol Panel and changing the settings for automatic shutdown, ...

...usually located at the top of the capacitors. You can enter the bios & check the hardware monitor. Hardware monitor will show the temp of the CPU, motherboard & speed of the CPU fan. Some ...

...DJ Hmmm...try resetting CMOS & checking all external peripheral connections: (KB/mouse, monitor, etc.) It seems to be the hard drive! Unplugged it and the system boots! Plug in the hard ...

...then I can't reboot it or if I turn the computer off it does the same thing it just displays the monitor setting after a while I keep turning off and on the computer and it will eventually load ...

...monitor keeps on blinking and since i dont have a speaker inside my CPu, i cant determine the problem. I again need your support for my problem. THANKS! More Power to FIXYA!!! If the monitor power ...

...shutting down and on and on and on unless i press the escape/esc @ f10 button,then it will on but no respond from the monitor....do anyone know the reasons...plz tell me what I can do except sending ...

...but the next minute when I shut down it and starts it again, then it does not give display at monitor, and only 2 fans, mouse work, one green light at mother board keep on, and cpu power button ...