...and PSU for faults. If the wiring is connected correctly, and the switch housing is not damaged, This will confirm that the PSU has failed. Replace the damaged PSU asap. This will correct the
replace the defective component. If the LED is still flashing (it should not flash with all connectors removed), plug the power cable into a different power outlet that is known to be good. If the LED
...damaged by ElectroStatic Discharge (ESD). To reduce the chance of ESD damage, work over a non-carpeted floor, use a static dissipative work surface (like a conductive foam pad), and wear an ESD wrist ...
...replace the power supply but still the same problem. I buy passed the power switch but still the same problem Did have a power surge in the neighbor hood alot of my electronics got damaged do you ...
...your system If the system does not ON then the SMPS might be damaged(It might be fuse or power transistor damaged). As your system is new one you will have warranty so replace your SMPS with new
Question about Gateway Computers & Internet
...replace the whole power supply. You don't want to give it a chance to short out the board. If this is a just a run of the mill business machine the power supply should only be around 50.00 or less ...
replace the defective component. If the LED is still flashing (it should not flash with all connectors removed), plug the power cable into a different power outlet that is known to be good. If the LED
Question about Gateway Computers & Internet
...replace the damaged components. Replace the surge protector or power strip. If neither was attached to the computer, it is highly recommended that one be used. Follow the user's manual to open the ...
...replace the damaged components. Replace the surge protector or power strip. If neither was attached to the computer, it is highly recommended that one be used. Follow the user's manual to open the ...
26 questions posted
Usually answered in minutes!
697 Questions
487 Questions
417 Questions
330 Questions
336 Questions