old admiral clothes washer leaks at front Troubleshooting Water Leaks Water leaks in a washer are often difficult to trace. There are many possibilities to look for. The problem could be a loose ...
...fill? I have recently relocated the machine and have been silly enough not to take notice when disconnecting the taps! if there are 2 hose connections then it is hot and cold fill. if only one hose ...
How do you connect the Timer to the timer wires The timer is disconnected from the wires. There's 3 wires and I don't know how to connect them Identify the type of timer you have and refer to the ...
can the washing machine run on cold water feed only and if so is there a special connection or do we just connect the cold feed only you can use a cold feed on washes below 50 degrees if you need to ...
Question about GE Washing Machines
Our Super Plus GE machine leaks water during drain spin cycle. All hoses are clear, and connected properly. Leak appears to be inside the washer body behind where the drain hose connects to the mach ...
Question about Hotpoint Washing Machines
does the hotpoint wma48 need a hot water supply connected? i heard that most new washing machines dont need a hot water connection. This is true. Just check if the machine has one or two water ...
Question about Beko Washing Machines
how do i connect a beko washing machine up to hot and cold pipes What is needed is to use proper hose to connect to the respective connections of the cold and hot line pipe in your house.Identify the ...
Water pouring out from soap tray !!! last week when a wash had finished there was still water in drum , thought it was a one off. then went to put machine on again and water started pouring out from ...
148 questions posted
Usually answered in minutes!
893 Questions
91 Questions
15 Questions
3 Questions