Indesit W 123 Front Load Washer "selenoid" Questions

...water when the washer is shut off. Any idea what is causing this...? Jamesbestor, The water fill selenoid had junk in it holding the valve open or the seat in the valve is damaged. Turn off the ...

...Now it won't get water on rinse cycle. I have troubleshooter all I can. Please help Check wire to selenoid water valve. Could be burnt out selenoid if run wit water

dont pull the water selenoide good fus gud dont pull the water selenoide good fus gud Hi from retired Englishman in SW France, This is symptomatic of a malfunctioning water control valve- the hot ...

...the water off when it has reached the right level. Isn't there a water level switch that tells the selenoid to shutoff the water? The waster turns off when you go to off so it appears the selenoid ...

WASHING MACHINE MAKES A GROANING NOISE WHEN COLD WATER IS ENTERING. Based on your description, the selenoid is bad. The same device feeds both cold and hot water - so locate your machine model number

...I replaced the load switch (water level switch), but the problem persists. try replacing your water selenoid coming in. remember it isnt a mechanical timer it is a computerized timer, so if the ...

...comes on when cold selected does not complete wash cycle must use dail to finish Sounds like the selenoid valves are backwards. Or the water hooked up backwards. Or actually like the cold water

...the washing machine from the mains -Open the machine -Follow the water inlet hose and the first selenoid you come accross would be the inlet valve (s) assembly -Check the water inlet valve coil ...

MODEL #KAWS750L WILL NOT SHUT OFF THE WATER The selenoid valve has some trash in it. Take the valve off of the back. It should be just a few screws, a couple of wire plugs and one hose on the inside. ...

...remove a load. Then it gradually starts to fill while it sits. What could be causing this???? The selenoid valve has some trash in it. Take the valve off of the back. It should be just a few