Indesit W 123 Front Load Washer "door" Questions

Ad

Question about Indesit Washing Machines

1 Answer

...Kenmore elite He3t Model Nol. 42926 203. We get an error code dL F. How do we correct this? It is a door lock failure and it flashes after the door locking routine fails to lock the door after 6 ...

Ad

My Whirlpool Duet washer will not start. I keep getting a "dl" and an "f" signal. I assume it means door lock failure. I've tried unplugging and opening and shutting the door before restarting but it ...

Ad

Question about Frigidaire Washing Machines

1 Answer

how does front panel come off (safely) to swap out door switch on kenmore washing machine 41744152400 The front panel does not need to be removed when replacing the door switch. What needs to be ...

Question about Indesit Washing Machines

1 Answer

...code dl then an f when I try to start the cycle. I have tried pause cancel twice then opening the door and starting the cyle and closing the door last thing and also starting with the door closed ...

Question about Indesit Washing Machines

1 Answer

Machine flashes F then dl. What can we do? There's a fault detected with the door lock and switch assembly. The door lock is not working or the door lock switch is not activated. This indicates that ...

My whirlpool duet GHW9100L washer door will not unlock and code comes up F dl, any idea's? Ff dl (failure fault door lock) Door Lock Error A Door Lock Error occurs if the door cannot be locked. It ...

Question about Indesit Washing Machines

1 Answer

my door lock has locked with the door open , how do i get it to unlock ? There is a manual unlocking tab located at the bottom of the door lock and switch assembly. Disconnect power to the washer ...

Question about Frigidaire Washing Machines

1 Answer

error code 41 The error code E41 means the control board is detecting an open door switch. It might be due to a broken wire harness, broken door lock/switch assembly, or in worst cases a faulty ...

Question about Whirlpool Washing Machines

3 Answers

Door open! My Whirlpool 6100 will not work....keeps telling me that the door is open! The door "clicks shut" when I shut the door. It tries and starts, then flashes "door open" what is wrong with it??

Question about Whirlpool Washing Machines

1 Answer

Whirlpool ghw9100 Door lock solenoid 60 ohm and 126 ohm? Duet job aid says 60 ohms on contact point 3 to 2 and 3 to 1 that is not possible because the two windings double the resistance the way its ...

Not finding what you are looking for?
Indesit W 123 Front Load Washer Logo

1,189 questions posted

Ask a Question

Usually answered in minutes!

Top Indesit Washing Machines Experts

Marvin
Marvin

Level 3 Expert

85241 Answers

sheakhly

Level 1 Expert

34 Answers

mark warfield
mark warfield

Level 3 Expert

453 Answers

Are you an Indesit Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...