...water and vinegar. Step 4 Most dispensers have a bimetallic strip or switch, attached by screws, which triggers the door release. With the front door panel removed, locate the switch, and push on it ...
...panel. The water inlet valve can be identified by the water hoses connected to it. One hose will lead from the valve to the pump/motor assembly in the center of the dishwasher. Check that the hoses ...
...panel. It's the device with the main water line from the house, a rubber tube to the dishwasher, and two wires attached to it. When a water-inlet valve is defective, you may hear the sound that's ...
...side panels and start a program to see if you can see where the water is leaking from, being careful not to touch anything while the d/w is running as live parts are exposed hope this is of some ...
...panel so you can see the different knobs and buttons, and can fix the parts controlling the soap trap. 5 Locate your soap trap. Close the soap trap cap and insert a screwdriver to push on the metal ...
panel showed no fault. The fault was caused by the failure of the solinoid (electric magnet) which opens the soap dispenser mechanism, located inside the door. I used an electric light up screw drive
40 questions posted
Usually answered in minutes!
50 Questions
26 Questions
36 Questions
31 Questions
