my HP j8707 fiber module keeps dropping out and i must re-seat it everyday in my switch Have you applied the latest firmware? or contacted HP support? HP support can be reached by calling ...
Fiber optic connection What's your question?
...2 minute dropout Hi there, We have two HP 2626 connected back to back via media convertors across fiber between buildings. We are having dropouts every month or two and they always last really
Hp 4108 vs 2524 I've hp procurve switches 4108 and 2524. I try to connect them with gigabit-LX fiber optic transceivers, but them didn't communicate. The distance between them
Question about HP ProCurve Computers & Internet
...switch i don`t have my rith config vlan 1 tag 25,26 what can i do for this problam my port 27,28 is fiber port that switch has a life time warranty. contact http://www.hp.com that switch sounds like ...
...using 3 of these switches in our network to connect 3 different buildings to each other. There is fiber run between the three building. Now here is where the problem starts. We have a connection ...
...is more than 100m away from my linksys switch. what is the right way to connect. if i go for a fiberoptic connection , but i dont know how to make connecction with source and destination in
fiber module sir, if i replace the fiber module,i have to configer the ip?? how to go insite the switch e: 199.256.0.1 or someting als?? Hi, you can login though the console cable, switch back side ...
...For mini-GBIC ports you have to set the media type under the interface settings if you want to use fiber, set the meida type as fiber and for copper media type as rj45 Dear,I work for Ingellen ...
Question about HP ProCurve Computers & Internet
...fs728tp switches in a hybrid network environment? Trying to setup VoIP using a Cisco 2901 through a fiber media converter to fiber to fiber media converter to Netgear FS728TP-100NAS PoE switch. Cisco ...
35 questions posted
Usually answered in minutes!
9 Questions
4 Questions
5 Questions
