Question about HP ProCurve Computers & Internet
...default IP of HP ProCurve 2510-48 ? Hello i got a HP ProCurve 2510-48 Switch, but i can't find the default IP. What is it ? There is no IP address when the switch ships from the factory. It is set by ...
default ip procurve 2510 48 there is no default ip address on a procurve switch. you have to put an IP address on the switch. You can find a manual for your switch at http://www.hp.com
...default IP address on a 2626 switch. HP Procurve switches are setup by default to get an IP address by DHCP. To execute the factory default reset on the switch, perform these steps: Using pointed ...
Question about HP ProCurve Computers & Internet
...is the default ip address for the procurve 2124 Procurve switches do not have a default IP address. you must put an IP address on the switch. You can find a manual for your switch at ...
2626 default ip procurve HP 2626 do not have a default IP address, you have to set the IP address on an enterprise class business switch. You can find the manual for your switch at http://www.hp.com
Question about HP ProCurve Computers & Internet
...default IP (Internet Protocol) address of the switch is 192.168.2.10 and the subnet mask is 255.255.255.0" So set your PC IP address in the same subnet and access it through your web browser. If it ...
...ip default-gateway x.x.x.x where x= routing device the above can be accomplished via a serial connection to the switch using hyperterminal with the following settings bits per second 9600 data bits 8 ...
How the put static ip in my swictch HP J9078A? is default ip for J9078A? tks the 1400 is not a manageable switch. Meaning that you can't assign an IP address to it.
...there is no IP address when the switch leaves the factory. If you do not know it, then you may have to return the switch to its facrory default configuration which is outlined in the switches
...default gateway for all the devices on the network. show running-config Running configuration: ; J4899A Configuration Editor; Created on release #H.10.50 hostname "HP 2650 dot 11 layer 3" snmp-server ...
35 questions posted
Usually answered in minutes!
9 Questions
4 Questions
5 Questions
