Question about 3Com SuperStack Computers & Internet
...led flashing All Ethernet port isn't working, the power led keep flashing. All ethernet port is dead. thank's (sorry for my poor english) A blinking power LED means that the switch is either ...
Port LEDs keep flashing in sequence. Nothing is plugged into the rear ports. It has power only. It just keeps flashing the ports LEDs in sequence. The ethernet switch maybe scanning the ports for ...
Question about 3Com SuperStack Computers & Internet
...panel, while you reconnect the power cable to the switch 4. Release the Mode button when the SYST LED blinks amber and then turns solid green. When you release the Mode button, the SYST LED blinks ...
...led stop flashing. Hope this works out for you. Pls post again how things turn up. Good luck and kind regards. Solution 1: Reset router by pressing reset button using your finger or with a tip of a ...
led glowing on hp procurve 2650 operate a factory reset to make sure it is hardware Fault: press reset and clear simultaneously for 3 good seconds then release Clear, when Switch fault and ports start
Question about Dynex Computers & Internet
lost connection between switch and hub - LED flashes every 5 secs Upgraded my internet connection and it comes in on a wireless router. I have a CAT5 cable going to an 8 port switch and then ...
Question about 3Com SuperStack Computers & Internet
...3550 Series Switches For 2900/3500XL and 3550 series switches: Release the mode button after the LED above Port 1x goes out. Note: LED position may vary slightly depending on the model. Catalyst ...
Question about 3Com SuperStack Computers & Internet
...the power cord to the switch. You can release the mode button a second or two after the LED above port 1x is no longer illuminated. The following instructions appear: The system has been ...
gs-108a all leds blinking If devices are plugged into all of the ports and everything works, then there's no problem. If all the lights are flashing and nothing works, then the switch is dead and you ...
Question about Cnet Computers & Internet
...LED are blinking even without LAN connected to it. somebody pls help. Hi, The LEDS blinking normally would indicate reset internally or when the unit has just been powered on. Continous LEDs lighting ...
4 questions posted
Usually answered in minutes!
2 Questions