Motorola RDM2080d MURS Two Way Radio "receive cant transmit" Questions

...cant receive a signal from the baofeng vr6 to my icom v85. Check the input output settings. the baofeng is notorious for being somewhat difficult to program manually. Try the software setup if ...

...receive but cannot transmit. What can be done? 1) Double check your interference code eliminator and the Qt filter. Make certain they are all set identical. 2) If you are still having trouble, shut ...

...receive but not transmit, any Idea's my JRC JHP 500 will recieve but not transmit. on lower left side of monitor screen it says PPL I looked in the manual and cant find anything like that. Can anyone ...

...cant i talk over it???? 1. Make sure both radios are transmitting and receiving on the same frequency (no repeater offset). 2. Either turn off CTCSS tone or make sure both radios are set to the same ...

...cant talk on, i can just listen. anyone know why?yaesuft1900r The Yaesu FT1900R is an Amateur (Ham) Radio 2-meter Transceiver. Although the receiver covers from 136-174 MHz, will only transmit from ...

cant respond It is possible your PL code setting is not set the same as the other unit. Here is a link to the user guide http://www.mytoolstore.com/motorola/rdx_userguide.pdf You will find programming

...cant talk or anything! Why? Beeping when pressing the PTT can be a sign of low or bad batteries. To check to see if this is the problem, move a battery from one of the working radios over into one of ...

...cant receive My Motorola FV500 can send transmissions without incident. BUT it has stopped receiving incoming messages. Any suggestions? Do you hear the Beeps on the speaker? Check for the QT and the ...

...receive calls but cant transmit when I go to talk and all it does it beeps what do I do You may have the "tx offset" turned on and may be trying to transmit on a frequency that is considered "out of ...