Aironet BR500 "connect cisco ap" Questions

connect to AP. Amber LED suggests IOS errors according to cisco quick start guide http://www.cisco.com/en/US/docs/wireless/access_point/1130/quick/guide/ap1130qs.html#wp30116. Any suggestions would be

If neither of the above is possible you would need to use the same VLAN for each AP and each of the interfaces on the NetGear and Cisco devices which negates the need for the VLANs. I hope this helps

...Cisco 1020 reset for factory settings If your current controller can't see the AP, then the 1020 can only be reset through the Controller it was originally configured with. It doesn't have a console ...

AP loses IP What exactly do you mean by AP loses IP? Are you saying the AP access point is no more able to get IP from DHCP server? or the AP is no more able to provide IP to the connecting users?

...Cisco the unit does not run "Hot". With 3 others at another location, they only allow 3 devices to connect and will disconnect any devices previously connected. These 3 are supplied PoE from Dell ...

IS CISCO LINSYS WAP-610 AN AP REPEATER Range extender? You cannot use the WAP610N in repeater mode unless you connect it to your router using a cable.

...cisco wap4410n won't let windows 7 connect Dear Romo i have had lot's of problem with the WAP 4410N the usual solution was to reset the Access Point and in some case you have to reset it to factory ...

...Connect using pull-down menu to select the port to which the cable is connected, then click OK. In the Port Settings window, make the following settings: Bits per second (baud): 9600 Data bits: 8 ...

Cisco 1131 AP form 12.3(8) to 12.3(11). And the configuration remain the same. But now I am facing a problem like, when I enable my PC wireless software it cannot find the AP. I connected the AP in PC

...cisco aironet , red light blinking continuously. Now when i open via console , it is showing " ap: " ..I am stucked up. Can any one please help me. Sounds like the network connection to the ...