login to the router) change it to an unused IP that is easy to remember. (My main router is 192.168.1.1, my second is 192.168.1.2 and my third is 192.168.1.3) ***when you save changes the page won'
Question about NetGear Computers & Internet
...uplink port. Then connect pc to any other port. Done!Try resetting it by holding the reset in till it cycles through. This will clear all custom setting and try again.I normally don't suggest ...
...UPLINK port on the router. Plug an Ethernet cable from the computer to one of the LAN ports on the router DHCP should configure your computer with an IP address Click on Start/Windows button and type ...
login and password.Read this DOCUMENTIf you are using a cable modem to connect, the issue may be the MAC address is being held by the Cable modem. To avert that, try this:Power down the computer
login info. ? You will need to hard reset the whole unit unfortunatly, there should be a reset button on the back of the unit that would do that for you you might need a sharp head to do that, usually
6 questions posted
Usually answered in minutes!
9 Questions
3 Questions
