Pitco Frialator SG18S Deep Fryer "flames flue" Questions

...flue could low level of propane in tank cause this? Hi there. Flames rolling back instead of shooting inside the fire tubes can be a result of clogged fire tubes or air entering the flue, also check ...

FIRE IN FLUE There may be soot/ carbon build up inside the fire tubes that's why flame crawl all the way to flue. Also check if your fryer receives the right gas pressure and type as rated on the ...

...quality and in turn will produce soot. Also, make sure that no air or ventilation is directed towards the flue riser, otherwise, the same will result, flames rolling back towards the door.

...Have a technician inspect and clean the fire tubes for soot deposits/ build ups. Check also if there is no air or ventilation directed on flue as it will push the flames back to the burners.

...Flames coming out of the exhaust can be caused by several things. The fryer could be set up for natural gas and it is installed on a propane system. The fryer can be leaking oil near the burner tube ...

is there an easy way to get access to the rear vent to clean away soot and buildup? You have to dismantle the back panel to have access in cleaning the flue. Soot formation or carbon build up on ...

FLAMES BURNS AND EXTENDS AT THE BACK OF THE FRYER INTO THE FLUE . WE HAVE CHECKED THE CORRECT INJECTOR , CORRECT BAFFLE NUMBERS, A LP ROBERTSHAW GAS VALVE check the burner orifice and gas valve spring

...Flames were shooting out of the fryer. We shut off the gas supply. What is the problem? Check for loose or broken gas line connectors, including the pilot line. Check for blockage in the flue in the ...

please, what is the average height requirement of a ' splash guard ' between a deep fryer / open flame ? As high as the flue stack and it should be made of stainless steel.