Question about Audio Players & Recorders
...mixer does not have power amplifier outputs for speakers. The red and white RCA jacks are out puts that would plug into a power amp input, and the speakers would connect to the power amp, as in a PA ...
yamaha stagepas 500 when i turn it on it turn off Short circuit somewhere, possibly in the speaker connections. It's going into safety shutdown mode. Unplug everything except the power cord. Turn it ...
mixer does not provide power, so the speakers you're using have to be self-powered or be driven by a separate amplifier. You would then plug the Stereo Out connections into the INPUTs of the amplifier
Question about Numark Audio Players & Recorders
...mixer into a bass amplifier and then from out of the bass amp into a cabinet. The problem is that when I try to play two records at the same time, all I can hear is the left turntable. As soon as I ...
Question about Numark Audio Players & Recorders
During playing, both channels cut out at the same time whether playing discs or memory sticks. What's wrong? Turned it off and on, changed power connection but still problem persists. I suspect the ...
Question about Behringer Audio Players & Recorders
...mixer cannot find amplifier inputs on my mixer If you need a better answer post again with more details. You can connect an amplifier to any of the inputs assuming it has compatible output levels. In ...
Question about Behringer Audio Players & Recorders
mixer that I can connect and use with traktor pro. Is this a possibility? thankya You will need speaker(s), amplifier and appropriate wire. I see no problem with the Traktor pro You can get the manual
amplifier, or HEADPHONE out, as these are line level outputs and will not hurt the inputs of your mixer. Otherwise the signal going to the mixer will be too hot and ruin it. For a Marshall amp,I would
Question about Behringer Audio Players & Recorders
...claim any amplifier protection !!! If the powered mixer works in normal stereo, then it is probably OK. If it then does Not work in bridge mode it is likely to be the connector wiring. All the
9 questions posted
Usually answered in minutes!
147 Questions
75 Questions
19 Questions
14 Questions