Question about Lexmark E Office Equipment & Supplies
paper! and leave black dust on the edge! I have replaced the cartridge and cleaned out the area behind the rollers that had a TON of black dust. HELP!! it the leaking toner cartridge would have create
...edges are sharp. 4.If there is a build-up of toner at the entrance of the fuser try gently removing it with a flat blade screwdriver with care. 5.If this doesn't help it may be necessary to replace ...
Toner Low light (Step 3.2), press the Cancel button until the operator panel shows the light sequence that corresponds to the one listed on the Configuration Settings page. Continue with the remainder
...tray. As they print, open the cover, remove the toner and look down at the paper in the printer. Do you see marks along the edge? If no...replace the fuser. If yes...it could be the transfer
...The left edge of the paper is not printing. The remainder of the copy looks good. How can I fix this? I tried shaking the toner cartridge to evenly disperse the toner. pls check the developer ...
toner may stain the next sheet of paper that you print on. - Circumstances 2: If you can see the tail edge of the paper inside your Canon LBP 2900 printer. - A: Hold the paper by both edges and slowly
...toner cartridge 3) Remove any paper from the multipurpose tray 4) If you can see the LEADING EDGE of the jammed paper slowly pull it out. This may be easiest from either the multipurpose tray side or ...
Question about Sharp Office Equipment & Supplies
...paper. I have taken the toner cartridge and the drum cartridge out and cleaned it as much as I could and I still keep getting lots of toner on the edge of every page. How do I fix this? If it keeps ...
Question about Lexmark E Office Equipment & Supplies
...paper might be stuck. I've removed the toner cartridge, opened the back, and pulled the sides off. No paper is visible. Is there a way to get further into the machine to see where it might be ...
paper came out in a shad of light gray. You are probably getting low on toner. Your printer also might just need a little cleaning. I would open up the front of the printer and take out the toner/drum
37 questions posted
Usually answered in minutes!
224 Questions
171 Questions
106 Questions
83 Questions
56 Questions