fuser replacement how do you replace the fuser Wow i've worked on old printers but this is the the cream. 1-Open back door and remove the back cover ( two screws) 2-remove the top cover. 3- remove the
921 service Fuser error 921 service Fuser error 921 Fuser Error indicates that the fuser unit failed to reach the standby temperature. Leave the printer off for at least 10-15 seconds before turning ...
Question about Lexmark Optra Office Equipment & Supplies
LEXMARK OPTRA T614 REMOVING FUSERS 922 FUSER ERROR, COLD FUSER ERROR, ASSUMING CONECTOR ON FUSER OR A WIRE IS A PROBLEM If your fuser is actually getting hot, then it is likely the temp sensor. It ...
...To clear this error: Power the printer off and let it stand for at least 30 minutes to allow the fuser to cool. Remove the coating roller from the top of the fuser unit to reveal the orange fuser ...
921 service fuser error The 921 service fuser error indicates the fuser indicates that the fuser unit failed to reach the standby temperature. This usually requires service. But here's a couple of ...
Question about Lexmark Optra Office Equipment & Supplies
We have an Optra M412 that has a 921 Service fuser error. We don't know where to find the fuser Service Fuser Error appears when the fuser does not warm to the required temperature. For this error on ...
ERROR 921 SERVICE ERROR 921 Fuser Error Indicates that the fuser is below standby temperature when the printer is idle. Error codes 920, 921, and 922 may display for a cold fuser failure. A 920 error ...
error 921 fuser help This indicates that the fuser isn't heating up enough and is too cold. Either the thermistor, bulb, or power supply is on the fritz. I would replace the fuser if I were you.
Question about Lexmark Optra Office Equipment & Supplies
My Lexmark Optra S 1855 is showing a fuser error. What needs to be done? the fuser needs to be replaced its about 200 dollars just search for Fuser for the model of your printer Thank You John C
...paper folds up and wont progress to final outlet if the paper is stopping at the entry guide to the fuser the hotroll gear has been broken and the fuser is not turning replace the ...
47 questions posted
Usually answered in minutes!
62 Questions
52 Questions
38 Questions
17 Questions
15 Questions