...Error light (!) is displayed, close the front cover. The top four lights of the operator panel should come on, indicating that the printer is in configuration mode. Print the Configuration Settings ...
...Error light (!) is displayed, close the front cover. The top four lights of the operator panel should come on, indicating that the printer is in configuration mode. Print the Configuration Settings ...
Question about Lexmark E Office Equipment & Supplies
error Reset Procedure(s) after putting in new Photoconductor kit Resetting the Lexmark E340/342 (display type) machines 1) Turn the printer off 2) While still off, press and hold the SELECT and RETURN
error '' 84 Replace photoconductor'', I replaced ink cartridge then turned it off, restarted and still the same errow please help. Thank You With most all lexmark printers, the photocondutor is set by
...Photoconductor shows nearly 100% yet. Left margin looks normal, but printing goes right off right side of normal letter paper. Also found that any attempt to switch from "Normal" to the "Best" print ...
Question about Lexmark E Office Equipment & Supplies
...setting error photoconductor unit setting error appeared,the same was inserted again after necessary repair but still photoconductor unit setting error appears. What did you repair? as the pcu is an ...
...error page that states "The printer has stopped because the photoconductor kit has reached the end of its useful life." What is a photoconductor kit and how is it fixed/replaced? The photoconductor ...
Question about Gestetner Office Equipment & Supplies
...error says set drum completely Please open the front door carefully and open the right door also and then remove the photoconductor unit unit and reset properly. If the problems persist , call an ...
Question about Dell Office Equipment & Supplies
...photoconductor kit has stopped working. I just replaced everything and keep getting the same error. If the drum cartridge has not been replaced, it must be replaced before resetting the counter to ...
Question about Lexmark E Office Equipment & Supplies
...error message? please i need yuor help Turn the machine off. Open the access door and remove the cyan photoconductor unit. Check the contact pins are straight and undamaged. Gently reinsert the unit. ...
30 questions posted
Usually answered in minutes!
224 Questions
171 Questions
106 Questions
83 Questions
56 Questions