Lexmark P6250 All-In-One InkJet Photo Printer "error message clear carrier" Questions

...error message is a generic message that applies to a multitude of things. The carrier while is in right, might not be sitting right. A piece of plastic that holds the carrier might be broken or the ...

...error message return? Yes: Continue to step 2. No: Attempt a test scan. If the error message does not reappear, the error is resolved. 2Power off the AIO and remove the power supply from the back of ...

...error message return? Yes: Continue to step 2. No: Print a test page. If the test page prints, the error is resolved. 2 Power off the AIO and remove the power supply from the back of the unit. Open ...

...error 2200 message everytime I try to send a fax Hello there: this is a scanner stall or jam. The steps below will help you to resolve the issue and clear the error message. Printer Reset NOTE: The ...

...error message and resolve the issue. The 2200 error message indicates a scanner stall or jam. The steps below will help you to clear the error message and resolve the issue. Printer Reset NOTE: The ...

error message on printer: It says to clear the carrier jam; what is a carrier jam? How do I clear it? Make sure the paper is out where it was jammed. Unplug the printer from the wall for thirty ...

...error message indicates a scanner stall or jam. The steps below will help you to resolve the issue and clear the error message. Printer Reset 1 Power off the All-In-One (AIO) and remove the power ...

...and then received an error message say clear carrier jam; how do I clear it? Unplug printer from power, not computer. Wait 60 seconds and plug back in. Turn it on and it will probably clear the

...error message saying "remove jam from carrier". there isn't a jam but the message won't go away, even after following the steps. Try feeding a sheet thru the top mutisheed scanner feed, or look for ...

...Error message says "Clear carrier jam" but there doesn't seem to be jammed with anything. Carrier rapidly and aggressively slams back and forth. A very thin (8 inch?) piece of plastic has come undone ...