Logitech Cordless Click! Mouse "battery clip" Questions

...see a rectangular area (similar or the same as the picture below) with a small clip. All you should need to do is use a finger, push on the clip and lift. This should reveal the battery

...battery compartment, that holds the two batteries in place. To remove that cover you will need something to pry lightly on the lip clip pushing it forward toward the wheel. Remember just a little ...

my mouse will not connect to my computer the batteries are brand new try this: look for a button on the receiver, press it with a paper clip and then look for a button on the mouse and press it with a

...clip up gently though, if your battery loads in the front you dont need too remove screw on the bottom too get too your keyboard but on the top of the keyboard after you done that remove key board ...

...the battery goes . I have a mk300 cordless keyboard and the mouse came with it. underneath the mouse should be a clip/snapon port or a port shut with a screw. open it and thats where the battery

how do you get in to change the battery? Should just be a cover under the mouse that clips off, you may find some youtube vids showing how to change the battery for your model

GE Wireless 2.4 GHz Mouse 99914 can't get batteries in it Right below the storage compartment for the USB Nano receiver is a small lip clip. You can try to light it up carefully with your nail or ...

...clip can be moved to get to the battery). The battery holds all your startup settings, including time and date, when the computer is off, so if you have to reset date and time every time you turn it ...

I can not figure how to open it to insert battery pull back the top while holding the bottom How to open what? The mouse? On the bottom there is 'usually' a small sliding access door to replace ...

...button on the underside that you you can press (with a pen tip or paper clip to reset the mouse). Either the new battery or the reset should solve your problem. Please rate this solution.