Denon AVR 1312 "connect subwoofer back" Questions

...connect a subwoofer to an amplifier, receiver or processor. The best way is to connect the subwoofer to the SUB OUT or LFE output of a receiver, but some subwoofers can be connected to the speaker ...

connect it into the pioneer? on the back of your pioneer audio/video receiver, you will plug the cable into the subwoofer pre out (back of your receiver) then connect this same cable to your subwoofer

connect to an subwoofer How to connect to Jamo ABR passive tube subwoofer You need a subwoofer cable then you attatch the cable from the back of the amp into the sub and power on the subwoofer and amp

...the back)? Have you set subwoofer out in the menu(under speaker settings or similar menu you will find all the channels that you have connected and here you should have "YES" for the subwoofer)? ...

...subwoofer (Tannoy). No back surround, but Zone2 connected. Speaker setup: Subwoofer: yes Front: full band Center: 1OO Hz Surround: 100 Hz Surround back: No LPF or LFE: 120 Hz Subwoofer mode: Double ...

...subwoofer pre-out, connect one cable here, and connect the other end of this cable to your subwoofer - line level in. (depends on your subwoofer and receiver) but that's how mine is connected. yours ...

RCA cable into the Subwoofer Preout from the back of the VSX-D510 and to the input on the back of the subwoofer. If there is a red / white connection don't sweat it, just use the red. Should work fine

...do I connect a subwoofer to avr3806 amp I've looked on the back of the amp and I can't find where to connect my subwoofer. Check in the section labeled for DVD. It will say LFE out, or subwoofer

subwoofer that will connect to my rx-v371 you can connect Yamaha YST SW800 at the back of your receiver ( label =subwoofer )http://uk.yamaha.com/en/products/audio-visual/speaker-systems/subwoofers/yst

do I connect the subwoofer to the Receiver? There shouldnt be a problem with that at all. The subwoofer needs to be self powered. The Yamaha has a "Subwoofer Output" on the back. Just connect it there