Question about Viking Kitchen Ranges
...valve to replace it It depends on which valve your replacing. If its a burner valve, you have to remove the control panel to gain access to the burner valves. If its the oven valve, most ranges they ...
...assembly. This control valve is damaged, thus, causing the issues you are experiencing. This mechanical failure will require you to replace this control valve, asap. Part number will be ...
...replace the gas safty valve eather the ignitor is not allowing enought amps to open the gas valve enough to light or the valve is opening to slowly eather way i would go ahead and replace both this ...
Question about Garland Kitchen Ranges
...valve can I replace that with? Try to replace the valve with the same type that you're removing. Find the part on ebay, or type the part # on any search engine. You can find almost any part if you ...
GE XL44 gas oven we replaced the ignitor and the oven does not work the broiler does Hi, this could still be a defective igniter, to verify you need a volt meter. The voltage being delivered to the ...
...the ignitor is weak. Tap on the valve while the ignitor is glowing with the plastic end of a large screwdriver. If it lights replace the ignitor. If it does not replace the valve and the ignitor. ...
...on yet not let the gas flow is because the IGNITER IS WEAK and not drawing the proper power to open the gas valve. Replace the igniter nad the oven will work without having to tap on the valve ...
...you think that the problem is the gas valve??? thanks brendan your valve is bad replace it the ignitor needs to darw a min of 3.5 amps to open the valve if it is drawing the amps then the valve is ...
...valve switch how do i access the control valves/switches to replace one that has shorted out? it keeps popping even when the switch is off. thanks, dale This just started to happen to ours too. It's ...
...the gas safety valve to open. You might also consider testing your voltage with a digital meter, as lower voltage will cause ignition problems also. (say 110 volts instead of 120) Replace the
105 questions posted
Usually answered in minutes!
231 Questions
72 Questions
46 Questions
31 Questions
