Tappan 18 in. MDR251RE Built-in Dishwasher "wont turn even though" Questions

wont spin. I get water but not enough pressure to turn the top arm. The bottom arm works fine. Should the top arm turn easily when pushed by hand. It appears that it is not tight even though the screw

...even though its empty and it wont go any further,wont re fill or spin,and when the machine is turned off it loses memory,we always run a cold wash but after being turned off it self selects a warm ...

even though the impeller is working, the blades cant. That means there might be a blockage. Thats usually the reason why something wont drain. I'm not an expert, its just me trying to be helpful, I do

turn it on it fills with water but it wont run thru the cycles even though I can hear the timer going through its cycles. Once the timer has finished it will not drain. Any suggestions will be greatly

turn it on it fills with water but it wont run thru the cycles even though I can hear the timer going through its cycles. Once the timer has finished it will not drain. Any suggestions will be greatly

wont start straight away. You have to turn it off again wait 5 mins then push the on button and the eco cycle starts immediatley. Its ok after that. It seems to help sometimes if you remove the filter

...turn the power button on, it sounds like the DW is trying to empty even though theres no water in the main compartment.Also, it wont allow me to chose a programme to run and it flashes E4 and beeps. ...

turn it on it fills with water but it wont run thru the cycles even though I can hear the timer going through its cycles. Once the timer has finished it will not drain. Any suggestions will be greatly

wont pass when I turn the machine on! What should I do? salt tray does have water in there its supposed to have. its probably the magnetic switch on the mains water line in the dishwasher these can go

...wont stop. My dishwashers just stop in the middle of the program and started draining the water. And it dose not stop. The power button on the front panel turns of the power indicater not the machine ...