...rubber casing has gone sticky Many cameras and binoculars are covered with a sprayed on thin layer of rubber which breaks down after about 5 to ten years. It becomes very sticky and can be scratched ...
...take them apart to determine the fault. Like any bearing or gear system, the part would have to be cleaned with a degreaser, then reassembled with new
...rubber armoring is melting or becoming all sticky and it gets all over my hands and fingers and I have to use Goof Off Citrus Cleaner to clean my hands and fingers. What happened? It can be easily ...
...rubber coating has started breaking down and getting sticky. Is there something I can clean them with that will remove the stickiness? Try it with rubbing alcohol first - just keep it away from the ...
...rubber and the surface begins to perish over time. My solution was to clean the affected parts with acetone (nail polish remover), rubbing it on with a cloth until the top (sticky) layer of ...
i own a leica 8x42 ultravid,the rubber coating has become stained with what looks like salt.how best to clean? If it is salt, then it's water soluble so just use a damp cloth.
...rubber so i can be gently prised off with a small flat balded screw driver. 5. Unscrew the central phillips screw and washer. 6. Using a pair of pliers, gently turn the central black focusing knob. ...
...screws and their channels that allow the eyecups to move in and out. Clean any debris out of the channels, tighten or replace the screws if necessary, and fit the rubber covers back onto the
2 questions posted
Usually answered in minutes!
284 Questions
229 Questions
170 Questions
130 Questions
106 Questions
