Pioneer Vsx-822-k 5.1-channel 3d-ready Network A/v Home Theater Receiver "remote turning receiver" Questions

receiver my remote control does not communicate with my receiver. does not turn on or off or switch components. My situation is different. The remote control can turn on the unit and all functions are

...receiver or the remote. I've reprogrammed the remote twice but it still acts up. I've talk with a tech at FIREDOG at my local Circuit City Store and at the Home Theater Store that programmed the ...

...remote for Yamaha do not turn the power off to the receiver but they will turn on and adjust volume. Joseph, codes 0081,0082,0176, 0186, 1176, the attached manual may have more codes. Yamaha rx-v2500 ...

...will work everything but sound, i believe it is a receiver problem If the remote can work other functions of the receiver then check the owners manual, it may tell you how to reset the

...to buy a new remote or buy a universal remote control. thank you for using fixya CHARCOIS The sensor in remote is not working . If you have any other universal remote try to access the receiver

...turn on/off my receiver The Remote Code 1789 will both turn ON and also turn OFF the Onkyo TX-SR605 AV/Receiver. Many codes will either turn it on or turn it off, but not both. Code 1789 will do

...operation. Point the remote at the Receiver and press the power button. If it turns off the receiver it is now programmed. If not Repeat steps 2-5 until the remote turns off the unit.Good Luck, ...

receiver and the remote speakers will not turn on. The main speakers work fine but when I depress the button to turn on the remote speakers they do not switch on. I had the same problem. You must turn

remote control, turning it off works. What can I do? Please Thank you in advance, Must have a bad remote control then . Did something spill onto the remote near the power on button? Short of getting a

...turning it on again, it will use the new settings. You can also try to reset the remote control codes to factory defaults. On remote, press CODE SET with a tip of a pen or pencil. TRANSMIT light on ...