Question about Audio Players & Recorders
coming out of the speakers is extremely low. Thanks, Claude Butler No phono inputs?? You will need a phono to line level preamp to use aux input. Magnetic phono cartridges like the one on your pioneer
...phono preamp inside, these aftermarket preamps were made for exactly this situation. As said above, use the red and white cables coming from your turntable and plug them into the input of the preamp. ...
Question about Pioneer Audio Players & Recorders
the phono works, but i get no sound when tuner on I get no sound through speakers when tuner on radio station. I do get sound when I have phono on. This usually means that the tuner is not getting ...
...phono, or tape to work. I can switch between input sources so that it shows as the remote input source on the display, but only the Tuner will produce sound. I can set the main speakers to Tuner and ...
speaker and VERY quietly. Is there a cable which can convert from the left/right aux-in input to the standard 3.5mm jack? thanks :) Hi, as you do not mention the model I have to guess that your player
...coming from my sub to connect to the plug on the back of my kenwood vr305? Hi .. According to the manual there's a pre-out (phono style RCA) connector for the sub but it needs to be a powered ...
Question about Yamaha Audio Players & Recorders
...speaker goes off when using Rec out on the Phono input I have a turntable connected to my phono inputs on the Yamaha RX-595, and from rec out to the LINE in of my PC to get 5.1 sound. Lately, when I ...
Question about Sansui Audio Players & Recorders
phono stages emit a buzzing/distorted sound even if a turntable is not connected. There is also no sound coming from the left speaker (I already tried switching the speakers, and the left output doesn
...Phono" inputs, and the sound is only coming throught the center speaker, and it is very muffled and a little fuzzy. I also have to turn it up quite abit to even hear the music. Don't use the phono ...
...phono style connectors to slot into these and wired them to the speakers (I presume that this is correct). There is a test tone option on the reciever to set up the volume levels on each speaker, I ...
3 questions posted
Usually answered in minutes!
59 Questions
46 Questions
28 Questions
36 Questions
35 Questions