Marantz Nr1402 Av Receiver "disconnect front" Questions

...a system plugged in at the back on V AUX 2 at the back , it will automatically override the front input . try to disconnect the back input and try the front on its own and let me know how you go

disconnect the wire from receiver's right-front terminal and connect to left-front terminal. If it doesn't work, you are either connecting to wrong terminal or the terminal/receiver is faulty. At last

disconnect surround speakers-and front speaker after-and later center speaker.ever time you disconnect you check the operation until you find the bad one(or two)which make the problem change its cable

...Front display screen won't light up at all everything works fine and every once and a great while it will be bumped in just the right way and it will come back to life for a short period of time then ...

...disconnect the two front speakers and the subwoofer. Is that possible? well it depends on what audio device installed on your computer coz other you can make an adjustment for 4 channel, 5 channel ...

disconnect all the speakers either by switching off the speaker A and B on the front panel or disconnecting all the cables from the back terminal Make a note of which wire goes where for reconnection.

My 2 front surround speakers on my Yamaha HTR-6040 quit working. Any suggestions? Look at the amp for disconnected wires. If OK then the amplifier may have blown output transistors.

...front panel controls to do this. Set MULTI-ZONE to OFF. â?¢ Disconnect the iPod and USB memory device from the receiver beforehand. 1 Switch the receiver into standby. 2 While holding down ...

I have a vsx92 that worked great up till my wife disconnected the hdmi cables to swap satellite to cable. Video runs through hdmi to the projector. I do hear audio, all cables are correct but I get no