RCA Onkyo Ht-r510 Receiver 6.1 Channel Dolby Digital / Dts "digital audio cuts" Questions

...digital input(s cut out Audio from both the coax and optical inputs cuts out after a few minutes. The audio from the coax cuts after 1-2 minutes while the audio from the optical cuts out after 5-10 ...

...cuts out in dts mode when in opt mode ..plays fine in analog mode with just normal dolby digital Your optcal line may have a break in it ! try another opt cable or try useing the digital cable

...cut off when playing 5.1 stereo? Random loss of a digital audio signal is usually a failure in the transmission or cabling on which it travels. Optical audio cables are intolerant of tight

...in and out), i was told by Xfinity to hook up the audio using a optical digital audio cable and it still does not correct the problem, any advice??? Try adjusting the sample rate of the

...audio signal cuts out for half a second. i have the tv hooked up via digital coax. the display shows A.F.D auto (or whatever i have it set on) and when the sound cuts out the AFD AUTO and the little ...

...circuits shut the thing down. Once it cools, seems to work ok. I have plenty of space around the unit, but still it seems to overheat, especially when playing hi-def / digital audio

...Digital audio out. My ps3 and xbox 360 are hooked up through hdmi and my surround sound needs the audio out port in order to receive the sound to display. THe only current way i can connect my ...

...digital,aac, dts, etc,then set audio input on your 696 to hdmi,also check that audio out for hdmi is set to off in the hardware menu on your amp,if you still have problems use the optical out on the ...

digital coax or optical for audio and see if that helps, you will still get all the benefits of HDMI video but perhaps no audio issue,ensure your kit is running up to date firmware. If that don't help

Sangean Digital Radio DAB+, no output via speaker Sangean Digital Radio DAB+, take out the headphones and there is nothing via the speaker? Anyone got any solutions? Have a look at the soldering to ...