Harman Kardon AVR 230 6.1 Channels Receiver "speaker connections" Questions

...speaker connections underneath the top connections is for additional speakers like surrounds to be able to be connected directly to the sub woofer speaker level out for sound. This of course would be ...

how do i connect 4ohm speakers to my 8ohm jvc receiver You must connect two sets of speakers to do this. You must connect them in series. Meaning, you connect the positive of one to the positive (red)

When I hook up the rear speakers to my in-wall speakers, I can't get any sound. I have speaker button 1 and 2 selected. Hi: you need to clear that you connect wall speakers for font,center or rear ...

Denon AVR-3802 Power cuts out and standby light blinks when connected to speakers. Works fine with headphones. Suggestions? I have repaired many of these Denon receivers over the last few years. Since

...speaker connections only then turn your receiver on. IF the loud noise comes back, this speaker is damaged. I am guessing that the speaker is fine. Now connect the speaker that was labeled "Left" to ...

connect speaker selector to reciever how do i connect 4 way speaker selector to receiver .model 40-244 radio shack Dear fellow stereo fans: First, you connect the wires which would go to your speakers

...speaker connections for a possible short circuit. Best way to do this is to remove all speaker connections (with the device turned off) and then try turning the device on. If you now don't get the ...

...speaker connections to make sure the problem doesn't follow the speaker indicating the wiring to the speaker or speaker is bad. Need to confirm that the input to the selected device is OK. Swap input ...

speaker connections at both ends!!!!!!!! (@ speaker & Receiver) Be certain ALL connections are tight & that NO strands of wire are shorting out the connections by touching each other...... the