...power switch button to take a pic. But this is not releasing and its very hard. But the lens keeps changing the focus. I am not sure where the problem is.Could you pls help me? Cheers rads_london, ...
...power switch, the light button continues to show until i take the battery/ies out. any help appreciated. thanks, Ken Try going into the menu and turning off the lock for shooting without a lens. Then ...
...shoot all it will do is focus. It won't take the picture. The green light comes on. The flash also dosen't work. could the flash bulb be burned out thus preventing the shot? It is asking for flash. ...
...lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and ...
power switch to to turn on the power again. -Remove and re-install the battery. -Use a Canon lens. -If the instructions above do not solve the problem, please contact your nearest Canon Service Center
...shoot. When you load film, you also need to set the ISO film speed setting. Pull up on the outside ring of the shutter speed dial and turn it until the number in the window is the same as the ISO ...
...power to fire the shutter. To check the batteries set the camera to M or Auto and halfway press the shutter whilst looking through the viewfinder. With good batteries one of the LED lamps will ...
I tested the camera without film and verified it powers on and focuses the lens and snaps pics without any film in the camera. I bought some film and loaded it and closed the back. The film advanced ...
4 questions posted
Usually answered in minutes!
159 Questions
113 Questions
85 Questions
60 Questions
49 Questions
