Good luck! Manually rotating sensor rotor inside camera and cleaning gear fixed the Canon "lens error" for me. I placed instructions with photo's here: http://www.avh.dds.nl/Fix-Canon-SD600-Lens-Error
...inside camera and cleaning gear fixed the Canon "lens error" for me. I placed instructions with photo's here: http://www.avh.dds.nl/Fix-Canon-SD600-Lens-Error/ It seems you have a problem with the ...
...Telescope using Internal Grooves inside the lens Walls. The inside wall of the Outer lens barrel has these grooves that guide the inner lens/iris as it telescopes out you notice it stays stationary, ...
...of the camera, it appears that if you force the lens too much, you could break the cogs inside if you force it too hard. If the cogs are in place, they will prevent you from moving the lens very
...lens are dirty, it is jamming and not telescoping all the way. Try smacking it around a bit, it may dislodge any dirt. If that doesn't work, easiest solution would be get a can of compressed air and ...
lens is not telescoping all the way out when you turn it on, and is clicking while it trys to adjust. Your problem may be due to weak/worn out batteries or corrosion on the battery contacts inside the
lens will not retract. Your problem may be due to weak/worn out batteries or corrosion on the battery contacts inside the camera which can prevent the full power of the batteries from flowing into the
...lens tries to telescope a little bit and retracts a touch, but I can't get the camera out of this mode. Can it be reset??? I have had this camera a little over 2 years, very low usage (special ...
140 questions posted
Usually answered in minutes!
163 Questions
92 Questions
57 Questions
28 Questions
25 Questions