...fuse will show you, when measured, the same value with what you measured before when you short-circuited the test pins). If you are sure that there are 3 of those look carefully on the pcb, they ...
...I never desolder the fuse if it's open circuit, I just break a glass type fuse and solder the wire across the surface mount component. Just make sure the fuse wire is the same value as the
...fuse problem? Anyway really love this camera, have waterproof housing and more. Any help would be greatly appreciated. Sentimental value too. Thanks, and Happy New Year. Take it to your closest ...
...replace the fuse it should be quite inexpensive, if not and they need to replace the main board you should first determine the value of your camera and then look at the cost of a new model. Good
...fuse has been burned, located fuses with E, P, K mark, test it but look okay (still connected). They i suspect an IC with burnt looking (not sure), lately clean the surface, read the mark "G2" ...
...value of the camera, and no guarentee it's fixed! I returned my Ixus960IS to Canon for repairs (warranty); it returned with a swapped circuit (they had noted). Working 100% again since. Canon Support ...
...fuse with the same value component. This will give you an idea where it is on the board. Sometimes a manufacturer will use a fusible resistor in the power section but I haven't come across a digital ...
...fuse on the main baord to the usb port. This should be a inexpensive repair, unless you need to replace the main baord. In which case first determine the value of the old camera versus a new model. ...
Question about Cameras
tail lights turn off. How to fix? 2000 S-10 Check the fuse of lights located at your left side when you face the engine it might the fuse of your tail light is busted (open) replace it with same value
86 questions posted
Usually answered in minutes!
944 Questions
808 Questions
687 Questions
597 Questions
590 Questions