...a fix? Sounds like it got pressed and got stuck under the plastic around the button. If you have a screwdriver and your warranty's expired (and assuming you've opened a camera up before), open the ...
...lens set up so that i can replace it? Remove the Back and front covers, then use a small flathead screwdriver to release the 2 hinges that hole the lens assy down; then unlatch the 2 ribbons
...it round again. Set button started working right away after that. Easy fix with an eyeglass repair screwdriver. I hope this post isn't to late to help you. If so, maybe it will help someone else. ...
Question about Casio Exilim Cameras
...ultra-small dirt pieces stuck in the focus gear. If you have the guts to take it apart with a PZ00 screwdriver, check the smal red gearrod for dirt located just behind the speaker. This speaker is ...
Question about Casio Exilim Cameras
...bottom of the memory card slot, you probably bent one or more of the contactor pins. Use a small screwdriver and carefully try to straight the bent pin then carefully put the memory card back in. ...
...You can google for instructions. You probably need a flat and a phillips magnetized jewelers screwdriver. I have done it a few times on canon cameras and if you need help email me at ...
...Is there a simple button to push or place on the menu? Any suggestions? Thanks!!! Use an eyeglass screwdriver to remove the back half of the case. (6 screws, 2 screws each on sides and bottom) When ...
...apart. That's what I did and my camera magically started working again. Just get a screwedriver or screwdriver like device and start unscrewing all the screws. make sure to watch how all the screws ...
...working, but wasn't. I fixed the issue by removing the batter and taking a very very very small screwdriver and prying the contacts back just a little bit in order to make contact with the
353 questions posted
Usually answered in minutes!
345 Questions
329 Questions
259 Questions
254 Questions
187 Questions