NEC MobilePro P300 Pocket PC "lcd signal" Questions

transferring information through IRDA (infrared). What should I do? Change the angle of the unit and make sure that there is nothing interfering with your signal. Try removing the LCD protection cover

allows infrared connection is checked and the IRDA is selected. * Change the angle of the unit and make sure that there is nothing interfering with your signal. * Try removing the LCD protection cover

...the LCD and Main board. The blanks screen shows power is drawn to but no interface handshake has been made. when a signal is not been transfer, cable is the main issue. Hope it help. Regards. ...

...Hello Ayoitzpyda, The problem you have is related to the connector from the mainboard to the lcd pannel. It got loose from it's socket and can't send the video signals to the lcd pannel to ...

LCD displays use incredibly small currents and any contaminants can 'steal' enough of the signal to cause a faded appearance of the characters. Depending on how clean the water was, you may be able to

...signal interference on a TV. The phone was bought used on ebay a few months ago in good condition and has not been abused to my knowledge. It has been suggested that i check the cable connections ...

...LCD display(operator logo). *#0000# To view software version. *#2820# Bluetooth device address. *#746025625# Sim clock allowed status. #pw+1234567890+1# Shows if sim have restrictions. *#92702689# - ...

signal is triggered from the coordinates of the contact. However, when the phone has pressure, these layers of plastic stick together somehow. So, to fix it.... Get a small strip of adhesive tape that

lcd is getting power but not a signal. YOu will need special screw drivers to get in there to take a look, They are callled Torx. See here for some more info. T-mobile Sidekick Repair parts i have the