Palm Zire 31 Handheld "stuck digitizer" Questions

stuck on digitizer screen as well my problem is the same! Just gets stuck on the digitizer screen and won't accept it. i need help ASAP. soft/hard resets have not worked. Remove the Screen Protector ...

stuck between the edge of the digitizer and the edge of the case. That can give you phantom key presses. Take a piece of stiff paper or thin plastic and run it *gently* around under the edge where the

...stuck on Tap the center of the target. The digitizer part is defective and needs to be replaced. You can find digitizer parts in ebay or other on-line companies, at reasonable prices. Regarding the ...

stuck between the edge of the digitizer and the edge of the case. That can give you phantom key presses. Take a piece of stiff paper or thin plastic and run it *gently* around under the edge where the

mc 3090 stuck on stylis adjusting needs a software reflash and recalibration of the digitizer. If you need assistance with this please contact [email protected]

stuck on the digitizer. No matter how many times I hit the targets, they keep coming. Rick W I would pull the battery and leave it out for 30 seconds, place it back in, turn the unit on, and try again

...stuck!! i think you have a problem with you touch screen digitizer. you can send your device to a repair center to replace the TP only, without the need od replacing the entire LCM display panel. A ...

...nothing happens - it's as though the Palm is stuck. Did you try a reset holding the power button? This will erase your data and apps, and if it still doesn't work, you can replace your

...stuck Today Screen. Tried hard reset and nothing. 2. Will not Sync... 3. Cracked Digitizer can still operate using buttons and can see LCD Is it possible to chang only Touch part of screen. Thanks ...

replace it urself cost around 25 $ or so do u want to proceed let me know , unless u change the touch panel digitizer u will be stuck at align screen thing let me know if i can help more RATE ME WELL