Ricoh Aficio 1018D All-In-One Laser Printer "port" Questions

aficio 2022 connected to computer by parallel port I have had this aficio 2022 for less than 2 years and have less than 20,000 copies. I only have used it as a copy machine . There is no network card

... If you have it connected by a CAT5 network wire, then the answer is no. if you are using a usb 1.1 port on your computer to print to it, then that port is a slow port. I would recommend getting a ...

...the configuration might be wrong. Go to printer properties in the control panel. Open up the ports tab, select configure port. You will see that it is probably set: protocol:Raw, port:9100. ...

i assign a ip address to canon ir3025 in windows open printer properties of some printer and select PORT, go on ADD PORT, and create IP port, then assign it to Canon Ir 3025. Be sure that the same IP,

...still same... It will not work to directly connect a network cable directly from the network port of the printer directly to your computer. You will have to use a cross-over cable and

tell me how can we set ricoh printer in a network ports type, and lan setting of printer download smart net monitor, give the machine and ip address and then use smart net to connect through the ...

...this problem. It will be most appreciated. Thanks. Check the connection to the printer. Check the ports on the driver to see if it's using the IP port or USB. Otherwise the IP's on the network ...

where is the usb port The 1018 series did not have USB. IF your machine has the network print option then it would only have a serial connection or an ethernet port. Should be on the right back corner

What type or printer cable will i need to connect my RICOH Aficio AP3800C to my laptop USB port usb cable.... u r trying to connect it to the usb port of ur computer... so obviously u need a usb cable

HI I am trying to connect my printer via a router You need to plug your comuter into one of the LAN Port and the Copier into another LAN port your Modem into toyr WAN port. Then you will need the IP ...