Ricoh Aficio CL2000N Laser Printer "puts black strips side" Questions

...black unit that pulls out of the right side (I forget the part's name, <$90). We replaced it and things are better but streaks of color remain. They suggested replacing the color one (about $400) but ...

side instead of going across smooth like it normally does to print.how do i put the piece back in? The encoder strip is most likely the problem. Unplug the power from the printer. Open the front cover

...black vertical line about 1 3/4 inches from right side of copy. Line runs the entire length of the copy. Happens only during copying color or black and white. Hello, The line issue is caused by ...

...side door.Black PCU will have one electrical connector on front, very visible, that needs to be unplugged with machine turned off, push a little black plastic guide on left side of PCU and it should ...

carrier jam a thin plastic piece has come out of my printer making the carrier slam into the sides of printer will this piece go back in and where does it go? Is it a clear plastric strip with little ...

...black switch. press the little button like thing and then slide the whole thing forward. unplug the ribbon strips and undo the screws. then open the lid where you photocopy (top one) and undo the ...

...black cartridge into the slot on the left side and push it down. Slide the color cartridge into the slot on the right side and push down. Step 7 Push the gray plastic cover down over the cartridge ...

side of my printer has come out, also a little black piece with four little arms and a design. Neither seem to be broken. However, my printer won't work. Please help. The spring might be the tensioner

...black strip, or is it just margin from the side of the document to the end of the glass? If nothing's missing, then probably you set a larger original size in the settings somewhere. Try a sheet of ...

black blotches on both sides of the paper, even when printing single side. The other won't load a magenta toner, otherwise it was looking good - I only need one printer so which one do I fix - and how