...tray. 3. The printer has stopped printing due to a major error. 4. The print cartridge is not installed. • Install the print cartridge. 5. The life of the print cartridge. • Replace the print ...
Question about Ricoh Aficio Office Equipment & Supplies
...printing on A4 - Ricoh C4500. When users print to our Ricoh C4500 using RPCS the print comes out as a cut off A4 print, so it does not seem to be detecting the fact that it is needing to use the A3 ...
Tray 1 * 3 Paper Tray 2 * Adjusts the side-to-side registration by changing the laser main scan start position for each mode. [ -10.0 to 10.0 / 0.0 / 0.1 mm/step ] FA 4 Paper Tray 3 * 5 Paper Tray 4 *
Question about Ricoh Aficio Office Equipment & Supplies
do with the paper size settings on printer driver, document print settings or page setup. If for example the computer thinks the paper size is Letter, and the paper in Tray 1/2/3 is A4, it won't print
tray set correctly? Does it read the proper size on the display of the copier? Ok....next, do you have the optional paper trays installed (3 & 4)? Is that where the 11 x 17 paper is? Then you probably
...printing 12x18 posters on glossy (150+ g/ms) through the bypass tray, I get the same results. My work around solution for the 11x17 duplex jobs is to spool 1000 pages in batches of 10. :-( I have a ...
...tray and restart the process. This happens 3 or 4 times on each check run. It has also been pulling 2 or 3 pieces of paper at a time. My IT department says it is the paper thickness that is causing ...
Question about Ricoh Aficio Office Equipment & Supplies
...3 SCS memory clear Resets the following user tool settings: Paper Input menu: Paper type, paper size, tray lock, System menu: Energy saver timer Resets the settings of the following SPs: 5009, 5812 ...
Question about Ricoh Aficio Office Equipment & Supplies
...tray 3, which contains blank paper. That seems simple enough, but I cannot get it to work. If I choose to print only the first page on tray 2 and everything else on tray 3, applying it to the whole ...
...Tray 3....but the tray does lift Start by pulling out tray 2 and setting it on the floor. Next take out tray 3 and slide it into tray 2. Print from tray 2. If it works, take the tray on the floor and ...
121 questions posted
Usually answered in minutes!
267 Questions
215 Questions
218 Questions
178 Questions
117 Questions