Question about Samsung P Computers & Internet
open, look at the top of the keyboard, there is a gap between the keyboard and plastic strip. There are 3 little black tabs holding the keyboard top edge down, these are above the Ins, F8 and F1 - use
...open with the Scanning Unit Support (on the right side) 3.automatically The Cartridge Holder moves to the replacement position.(don't force it manually) if it moves to right then close and open ...
3 screws to remove. They are right along the edge that faces you. There is one in the middle, and one on the right side, that are down in a little indention. (A small drop in the case) There is one to
3.Turn the laptop over on it's top. In the Middle of the back is a single screw. (Philips head screw. Size TM2.5 x 7.0) Remove it. 4.Turn the laptop back over to it's normal position, front facing you
...tab to depress, or lift to release the Back Stand once the screw/s are removed?C) How many screws?2) Was the Back Cover removal next? Screws around the outside perimeter are normal design, and easily ...
...open the case to change RAM on the Gateway ZX4951 All-in-one ? I eventually figured it out myself, and it works for all of the Gateway all-in-ones with the curved bottom. Requires small (#1) Philips ...
...3) Locate the HarDDrive Compartment Cover.(Sony's term is HDD Slot Cover)Looking at the bottom of the laptop, this is the rectangular cover that sits vertical, at the Bottom/Middle of the ...
Question about HEWLETT-PACKARD Computers & Internet
...Open the laptop, lay the Display Assembly back as far as you can. At the bottom on the outside corners, there are two rubber like screw covers. One in each corner. Carefully remove these (2) with a ...
...open, you will see the fan facingback of the laptop in the corner, it suppose to blow through the heat sink. Remove the fan, 3 screws, the screws are very little, be careful, you will see the inner ...
104 questions posted
Usually answered in minutes!
10 Questions
5 Questions
7 Questions
3 Questions
3 Questions