...paper jams,the usb cord works because I'm using it for the inkjet, and I use the same cord for the laser. I have no idea what to do and I'm at my wit's end. I've even gone to the Samsung website and ...
paper jam error,so what i could do to solve the problem Follow these steps : 1.1 Take out any paper that is not jammed. Remove the loose paper from the in and out paper trays to prevent any more paper
Question about Samsung ML Office Equipment & Supplies
out of 4 colours i am getting only 3 colours output after refilling i am not getting yellow colour at all on printed material after putting paper for copy it shows paper jam
...jam Just bought a HP Lasetjet CP4025, and I am printing on card stock paper (approx 54lb paper) and it keeps jamming on the 5th or 6th copy. I have the tray set for any size and any type of paper. I ...
...paper jam check paper. I have and there is no paper jam. It will take paper through if I push the paper in further but it will not print or copy because of the error. Any suggestions? dear szaszy as ...
Question about Samsung ML Office Equipment & Supplies
Paper keeps ripping on the side on normal one sided printing. Duoble sided printing paper just rips up and jams. sounds like some tron parper was stuck inside and has contributed to more paper tearing
Question about HP Office Equipment & Supplies
...hp 1600 laser colour paper jams are often difficult in all printers. There is usually a panel on the rear of the printer that you can open. This should allow you to get to the jammed paper and simply ...
Question about Samsung ML Office Equipment & Supplies
...inkjet 1000 Dear team, Plesae help me for hp businees inkjet 1000 problem on/off swich led & paper led blinking Best ragards pramod make sure all trays are pushed into place! check for paper
PAPER JAM. YOU JUST SEE THE BACK OF THE PRINTER A WHITE COLOUR ROUND NOB IS LOCATED JUST UNLOCK THAT NOB (LOCK AND UNLOCK ICON IS SHOWN BESIDE) PULL THE DOOR SLOWLY OUTSIDE REMOVE THE PAPER JAM GENTLY
paper jam problam i have a problam of paper jam after change a taflone roller.may its bad pressar roller.printer hp 1010. no the tefflon is not fitted properly as you again open the printer and clean ...
513 questions posted
Usually answered in minutes!
373 Questions
283 Questions
276 Questions
130 Questions
72 Questions